DESCRIPTION

Product formulated to seal leaks in the cooling system. It can remain inside the circuit with risk of obstruction.

 

WHAT DOES IT DO?

Seals cracks in radiators, cylinder heads and blocks while the product remains in the system.

 

WHEN SHOULD IT BE USED? FOR:

• Efficiently sealing leaks in radiators made of copper, brass, aluminium and plastic
• Sealing leaks in heating radiators
• Reducing the consumption of anti-freeze lost by evaporation in engines that work at high temperatures
• Sealing critical points of the radiator, such as: plastic-metal joints, creases and vertices.

 

INSTRUCTIONS FOR USE

1. Check that the circuit is clean
2. Shake the container until the components have mixed together perfectly 
3. With the engine at room temperature and without pressure, remove the cap of the cooling system’s expansion tank/radiator 
4. Add the contents of the product and replace the cap on the expansion tank/radiator
5. Start the engine and wait until it has heated to running temperature
6. Check that the leak has been properly sealed.
7. Must be performed by a professional expert   

 WARNING REGARDING USE

It is not necessary to replace the anti-freeze/coolant.        

 

COMPATIBLE

Compatible with any type of anti-freeze / coolant.

546 Radiator Flush

737 Cooling System Degreaser

508 CER-MET Permanent Block & Radiator Seal

 

RECOMMENDATIONS AND MAINTENANCE

Correct maintenance prevents expensive repairs. For this reason our Technical Department recommends:

 

Clean and service the whole cooling system:   

1 year

 

Add the product as a preventive measure:    

Not Present