FUEL ADDITIVE

Business hours in Spain:

DESCRIPTION

Cutting-edge product formulated for cleaning the particulate filter.

WHAT DOES IT DO?

Combined with the post-injection (regeneration) of the engine process, it raises and maintains the temperature of exhaust gases, descaling and incinerating impurities and residues from the filter that will then be expelled through the exhaust pipe.

WHEN SHOULD IT BE USED? - FOR:

Eliminating all types of impurities and residues with a high level of saturation from the particulate filter
Re-establishing a correct air/fuel relation
Vehicles that are driven short distances in towns and cities
Reducing the relation of polluting gases evaluated in the Vehicle Inspection Test.

INSTRUCTIONS FOR USE

Remove the fuel tank cap
Empty the contents of the container into the tank with a low amount of fuel
Replace the cap of the tank
Start the engine and leave it idle for 5-8 minutes
Drive for about 20 Km or more, keeping the revolutions between 2,500-3,000 r.p.m.
Must be performed by a professional expert

WARNING REGARDING USE

To correctly assess the filter, diagnose the percentage of saturation before and after using the product. Effective in the following systems: Common rail, CDTI, CDI, CDTDI, TDCI, CRDI, HDI, JTD, GDI, DCAT, DTI, IDE...

COMPATIBILITIES

027 Catalytic Converter Cleaner

461 Diesel Jet Clean

467 ITV Diesel

424 Intake Cleaner

427 DT1000 Injector & Glow Plugs Unblocker

428 Starting Fluid

RECOMMENDATIONS AND MAINTENANCE

Correct maintenance prevents expensive repairs. For this reason our

Technical Department recommends:

Clean and service the whole fuel circuit:

2 years - 30,000 Km

Add the product as a preventive measure:

1 year - 15,000 Km

Reference: 843654897500 Capacity: 300 ml. Units/Box: 15

DESCRIPTION

A cutting-edge product for cleaning inside the catalytic converter and other elements that make up the exhaust system.

WHAT DOES IT DO?

Cleans any type of accumulated residue and regenerates the chemical function in the catalytic converters of diesel and petrol engines, thus lengthening their useful life.

WHEN SHOULD IT BE USED?

FOR:

Re-establishing catalytic performance

Dissolving residues typical of diesel and petrol in pumps, injectors and exhaust systems

Re-establishing a correct air/fuel relation

Eliminating residues in the exhaust system after a turbo breakage

Cleaning variable geometry turbos which are blocked or with carbon deposit.

INSTRUCTIONS FOR USE

Remove the fuel tank cap

Empty the contents of the container into the tank with a low amount of fuel

Replace the cap of the tank

Start the engine and leave it idle for 5-8 minutes

Drive for about 20 Km or more, keeping the revolutions at a normal level.

WARNING REGARDING USE

During the treatment it is normal if the vehicle produces:

Excessive smoke, Characteristic smells, Jerking, An increase of r.p.m.

COMPATIBILITIES

500 Particle Filter Cleaner

461 Diesel Jet Clean

485 Injector Cleaner

467 ITV Diesel

468 ITV Petrol

424 Intake Cleaner

427 DT1000 Injector & Glow Plugs Unblocker

428 Starting Fluid

RECOMMENDATIONS AND MAINTENANCE

Correct maintenance prevents expensive repairs. For this reason our

Technical Department recommends:

Clean and service the whole fuel circuit:

2 years - 30,000 Km

Add the product as a preventive measure:

1 year - 15,000 Km

Reference: 843654897027 Capacity: 300 ml. Units/Box: 15

DESCRIPTION

Improved, cutting-edge formula for cleaning the fuel circuit.

WHAT DOES IT DO?

HyOx formula with a dissolvent and dispersant action that eliminates and cleans residues in nozzles, pumps and any other element in the fuel circuit, thus re-establishing the correct injector spray pattern.

WHEN SHOULD IT BE USED? - FOR:

Cleaning injectors and re-establishing the injection spray cone
Eliminating bacteria coming from biofuel
Cleaning resins commonly found in diesel, from the tank to the fuel chamber
Re-establishing a correct air/fuel mix, thus reducing consumption
Efficiently reducing the CO and NOx exhaust gases that are controlled in the Vehicle Inspection Test
Preventing fuel from freezing
Lubricating all the elements inside the fuel circuit.

INSTRUCTIONS FOR USE

Remove the fuel tank cap
Empty the contents of the container into the tank with a low amount of fuel
Replace the cap of the tank
Start the engine and leave it idle for 5-8 minutes
Drive for about 20 Km or more, keeping the revolutions at a normal level.
Suitable for applying with injector cleaning machines
Must be performed by a professional expert

WARNING REGARDING USE

To prevent fuel from freezing applying in the following proportion: 300ml – up to 60 litres of fuel.

COMPATIBILITIES

500 Particle Filter Cleaner

027 Catalytic Converter Cleaner

461 Diesel Jet Clean

467 ITV Diesel

424 Intake Cleaner

427 DT1000 Injector & Glow Plugs Unblocker

428 Starting Fluid

RECOMMENDATIONS AND MAINTENANCE

Correct maintenance prevents expensive repairs. For this reason our

Technical Department recommends:

Clean and service the whole fuel circuit:

2 years - 30,000 Km

Add the product as a preventive measure:

1 year - 15,000 Km

If the car is parked outside in winter, add a whole

bottle to prevent the fuel from freezing

Reference: 843654897461 Capacity: 300 ml. Units/Box: 15

DESCRIPTION

Improved, cutting-edge formula for cleaning the fuel circuit.

WHAT DOES IT DO?

Re-establishes the correct injector spray pattern.

WHEN SHOULD IT BE USED? - FOR:

Cleaning all kind of residue and sediment in the fuel circuit
Reducing the CO and NOx exhaust gases
Re-establishing a correct air/fuel mix, thus reducing consumption
Re-establishing the normal performance of blocked injections
Re-establishing the optimum level of lubrication in the system

INSTRUCTIONS FOR USE

Remove the fuel tank cap
Empty the contents of the container into the tank with a low amount of fuel
Replace the cap of the tank
Start the engine and leave it idle for 5-8 minutes
Drive for about 20 Km or more, keeping the revolutions at a normal level.
Suitable for applying with injector cleaning machines

WARNING REGARDING USE

During the treatment it is normal if the vehicle produces:

Excessive smoke

Characteristic smells

Jerking

An increase of r.p.m.

COMPATIBILITIES

027 Catalytic Converter Cleaner

468 ITV Petrol

424 Intake Cleaner

427 DT1000 Injector & Glow Plugs Unblocker

428 Starting Fluid

RECOMMENDATIONS AND MAINTENANCE

Correct maintenance prevents expensive repairs. For this reason our

Technical Department recommends:

Clean and service the whole fuel circuit:

2 years - 30,000 Km

Add the product as a preventive measure:

1 year - 15,000 Km

Reference: 843654897485 Capacity: 300 ml. Units/Box: 15

DESCRIPTION

Highly concentrated, improved formula for diesel engines.

WHAT DOES IT DO?

Re-establishes correct air/fuel mix, thus reducing the levels of HC, CO and NOx.

Ideal formula for ensuring the parameters adjust to the regulations of the Vehicle Inspection Test

WHEN SHOULD IT BE USED?

FOR:

Drastically reducing gas emissions in the Vehicle Inspection Test

INSTRUCTIONS FOR USE

Remove the fuel tank cap
Empty the contents of the container into the tank with a low amount of fuel
Replace the cap of the tank
Start the engine and leave it idle for 5-8 minutes
Drive for about 20 Km or more, keeping the revolutions at a normal level.

WARNING REGARDING USE

Proven effectiveness, as long as the engine has no mechanical problems.

COMPATIBILITIES

500 Particle Filter Cleaner

027 Catalytic Converter Cleaner

461 Diesel Jet Clean

424 Intake Cleaner

427 DT1000 Injector & Glow Plugs Unblocker

428 Starting Fluid

RECOMMENDATIONS AND MAINTENANCE

Correct maintenance prevents expensive repairs. For this reason our

Technical Department recommends:

Clean and service the whole fuel circuit:

2 years - 30,000 Km

Add the product as a preventive measure:

PRE – I.T.V.

Reference: 843654897467 Capacity: 150 ml. Units/Box: 30

DESCRIPTION

Highly concentrated, improved formula for petrol engines.

WHAT DOES IT DO?

Re-establishes correct air/fuel mix, thus reducing the levels of HC, CO and NOx.

Ideal formula for ensuring the parameters adjust to the regulations of the Vehicle Inspection Test

WHEN SHOULD IT BE USED?

FOR:

Drastically reducing gas emissions in the Vehicle Inspection Test

INSTRUCTIONS FOR USE

Remove the fuel tank cap
Empty the contents of the container into the tank with a low amount of fuel
Replace the cap of the tank
Start the engine and leave it idle for 5-8 minutes
Drive for about 20 Km or more, keeping the revolutions at a normal level.

WARNING REGARDING USE

Proven effectiveness, as long as the engine has no mechanical problems.

COMPATIBILITIES

027 Catalytic Converter Cleaner

485 Injector Cleaner

424 Intake Cleaner

427 DT1000 Injector & Glow Plugs Unblocker

428 Starting Fluid

RECOMMENDATIONS AND MAINTENANCE

Correct maintenance prevents expensive repairs. For this reason our

Technical Department recommends:

Clean and service the whole fuel circuit:

2 years - 30,000 Km

Add the product as a preventive measure:

PRE – I.T.V.

Reference: 843654897468 Capacity: 150 ml. Units/Box: 30

Reference: 843654897424 Capacity: 600 ml. Units/Box: 12

DESCRIPTION

Aerosol formulated for unblocking injectors, heaters, sparking plugs and bolts submitted to extreme pressure and temperatures.

WHAT DOES IT DO?

Its proven action as a tool eliminates and cleans residues of fuel and oil, unblocking:

Injectors in petrol and diesel engines

Sparking plugs and heaters

Bolts and screws in turbos, EGR valves, cylinder heads…

WHEN SHOULD IT BE USED?

It is especially suitable for:
Extracting injectors and heaters more easily
Cleaning and eliminating extremely carbonised residues
Un blocking EGR valves, turbo elements, bearings…

INSTRUCTIONS FOR USE

Apply generously to the parts that are going to be dismantled
Leave the product to act for at least 20 minutes
Clean the residues and repeat the application if necessary.

WARNING REGARDING USE

Prevents residues from entering inside the engine

Apply to elements at room temperature

COMPATIBILITIES

500 Particle Filter Cleaner

027 Catalytic Converter Cleaner

461 Diesel Jet Clean

485 Injector Cleaner

467 ITV Diesel

468 ITV Petrol

424 Intake Cleaner

428 Starting Fluid

RECOMMENDATIONS AND MAINTENANCE

Correct maintenance prevents expensive repairs. For this reason our

Technical Department recommends:

Clean and service the whole fuel circuit:

2 years - 30,000 Km

Add the product as a preventive measure:

Not Present

Reference: 843654897427 Capacity: 300 ml. Units/Box: 15

DESCRIPTION

An especially formulated Aerosol to obtain maximum efficiency in starting up of any type of engine at low temperatures or with low compression.

WHAT DOES IT DO?

Optimum level of ignition and lubrication which offers and efficient and safe start-up of:

Carburettor or injection engines

Petrol or diesel engines

2 or 4 stroke engines.

WHEN SHOULD IT BE USED? - Especially suitable for:

Starting up engines in adverse conditions caused by low temperatures or humidity.
Starting up engines with a low compression ratio. Professional (garage): a tool for starting engines with start-up faults.
Engines that are not used for long periods of time.

INSTRUCTIONS FOR USE

Dismantle all the conducts and elements until you reach to the admission collector/butterfly valve.
Spray for a maximum of 3-5 seconds.
Start the engine and let it run until it reaches operational temperature.
Switch off the engine and reassemble the necessary elements.

WARNING REGARDING USE

Diesel engines: the heaters must be switched off to prevent the pre-ignition of the product.

Check the engine works (if it does not start after repeating the steps 4 or 5 times).

COMPATIBILITIES

500 Particle Filter Cleaner

027 Catalytic Converter Cleaner

461 Diesel Jet Clean

485 Injector Cleaner

467 ITV Diesel

468 ITV Petrol

424 Intake Cleaner

427 DT1000 Injector & Glow Plugs Unblocker

RECOMMENDATIONS AND MAINTENANCE

Correct maintenance prevents expensive repairs. For this reason our

Technical Department recommends:

Clean and service the whole fuel circuit:

2 years - 30,000 Km

Add the product as a preventive measure:

Not Present

Reference: 843654897428 Capacity: 300 ml. Units/Box: 15

DESCRIPCIÓN

Tratamiento 100% sintético para el combustible de vehículos GLP, butano…

¿QUÉ HACE?

Su probada acción, combina un máximo rendimiento en

Evitar el acelerado y característico desgaste del tren de válvulas en vehículos GLP

(VSR: Erosión en el asiento de las válvulas)

Restablecer el nivel de lubricación de componentes frente a la ausencia de azufre en los combustibles en la actualidad

¿CUÁNDO UTILIZARLO? – PARA:

Lubricar y proteger válvulas y asientos de válvulas en motores con GLP
Disminuir drásticamente el desgaste y altas temperaturas de combustión
Proteger y extender la vida útil del sistema de alimentación de combustible
Motores 2 y 4 tiempos, inclusive diésel
lubricar y mantener limpios inyectores, bombas…

MODO DE USO

Motores con GLP- Gasolina:

Quitar el tapón del depósito de combustible
Añadir el contenido del envase y llenar el depósito (50litros máx.)
Poner el tapón
Poner el motor en marcha, conducir con normalidad

ADVERTENCIAS DE USO

No afecta el funcionamiento de sondas Lambda, catalizadores, FAP…

Puede utilizarse en motores diésel y gasolina sin GLP

COMPATIBILIDADES

500 Limpiador del Filtro de Partículas

461 Limpia Inyectores Diésel

485 Limpia Inyectores Gasolina

468 ITV Gasolina

467 ITV Diésel

027 Limpia Catalizadores.

RECOMENDACIONES Y MANTENIMIENTO

Un buen mantenimiento evita costosas reparaciones, por lo que nuestro

Departamento Técnico recomienda:

Realizar una limpieza y mantenimiento integral del circuito de admisión/escape:

2 años ó 30.000 Km

Añadir de manera preventiva:

1 año ó 15.000 Km

Reference: 843654897431 Capacity: 236 ml. Units/Box: 15

DESCRIPTION

Aerosol formulated for eliminating residue and sediment from inside the admission system.

WHAT DOES IT DO?

Its powerful action eliminates and cleans remains of varnish, oil, carbon dust and grease in: Carburettor and injection engines - Diesel or petrol engines

WHEN SHOULD IT BE USED? - FOR:

Cleaning residue and sediment in admission collectors, butterfly valves, turbocompressors, oxygen sensors…
Re-establishing the correct engine acceleration and idling patterns
Using in either assembled or dismantled parts, such as EGR valves and lambda probes covered in carbon or oil
Cleaning the crankcase ventilation elements.

INSTRUCTIONS FOR USE

Dismantle all the conducts and elements until you reach to the admission collector/butterfly valve
Start the engine and let it run until it reaches operational temperature
Maintain the engine at a constant rate of 1,5000 r.p.m.
Spray for 3 seconds keeping a distance of between 20 and 30 cm and check that the engine does not accelerate in an uncontrolled way or produce noise caused by pre-ignition (turbo engines)
After checking the engine is behaving normally, start spraying for 5 to 10 seconds and alternate each time you spray with 3 accelerations. Keep a check on the engine response
After the process has finished, leave the engine switched on for 5-8 to balance the values of the blend
Switch off the engine and assemble the necessary elements.

WARNING REGARDING USE

Injection or carburettor petrol engines: apply the product directly after reaching operational temperature

Diesel engines: if necessary, disconnect the EGR valve.

COMPATIBILITIES

500 Particle Filter Cleaner

027 Catalytic Converter Cleaner

461 Diesel Jet Clean

485 Injector Cleaner

467 ITV Diesel

468 ITV Petrol

427 DT1000 Injector Unblocker

428 Starting Fluid