ENGINE TREATMENTS

Business hours in Spain:

Reference: 843654897454 843654897455 Units/Box: 15

DESCRIPTION

Formulated to repair oil leaks in all types of engines

WHAT DOES IT DO?

Restores the elasticity and original size of joints and oil seals, thus detaining oil leaks.

It does not change the colour, density and volume of the oil.

WHEN SHOULD IT BE USED?

FOR:

Detaining oil leaks from the rockerbox gasket, crankcase and oil seals
Preventing leaks and conserving the flexibility of gaskets and oil seals
For extra protection, combine with MT2000 Metal Treatment.
It does not affect the correct performance of catalytic converters or particulate filters.

INSTRUCTIONS FOR USE

With the engine switched off, remove the oil filler cap
Add the contents of the product
Replace the engine oil filler cap.

WARNING REGARDING USE

Acts progressively, which means effective results are obtained after 500 km

Does not act on hardened/crystallised gaskets and oil seals

Apply preferably when changing the oil.

COMPATIBLE

Compatible with all engines and oils.

454 MT2000 Synthetic Metal Treatment

089 Smoke Eliminator

577 Motor Flush

157 Hydraulic Valves

448 Compression Motor

RECOMMENDATIONS AND MAINTENANCE

Correct maintenance prevents expensive repairs. For this reason our

Technical Department recommends:

Clean and service the whole lubrication system:

2 years - 45,000 Km

Add the product as a preventive measure:

1 year - 30,000 Km

For extra protection, combine with

MT2000 Synthetic Metal Treatment.

Reference: 843654897447 Capacity: 300 ml. Units/Box: 15

DESCRIPTION

A synthetic-based treatment formulated to reduce smoke emissions (bluey-white) and lower oil consumption.

WHAT DOES IT DO?

It forms a viscous layer filling all the spaces between worn components or with excessive tolerance, such as cylinder liners and pistons.

It does not alter the colour, density and volume of the oil.

WHEN SHOULD IT BE USED? - FOR:

Reducing the smoke emissions caused by excessive oil combustion
Repaired engines or which consume a great deal of oil
Preventing the saturation of the particulate filter in engines that consume oil
Increasing the engine compression ratio
Reducing internal engine noises
Vehicles with problems regarding the Vehicle Inspection Test caused by these cases.
It does not affect the correct performance of catalytic converters or particulate filters.

INSTRUCTIONS FOR USE

With the engine switched off, remove the oil filler cap
Apply the contents of the product after changing the oil
Replace the engine oil filler cap.

WARNING REGARDING USE

Apply preferably when changing the oil.

COMPATIBLE

Compatible with all engines and oils.

454 MT2000 Synthetic Metal Treatment

447 Oil Stop Leak

577 Motor Flush

157 Hydraulic Valves

448 Compression Motor

RECOMMENDATIONS AND MAINTENANCE

Correct maintenance prevents expensive repairs. For this reason our

Technical Department recommends:

Clean and service the whole lubrication system:

2 years - 45,000 Km

Add the product as a preventive measure:

1 year - 30,000 Km

For extra protection, combine with

MT2000 Synthetic Metal Treatment.

Reference: 843654897089 Capacity: 355 ml. Units/Box: 15

DESCRIPTION

Treatment formulated for eliminating varnishes, sludge and solid remains from all the internal engine parts.

WHAT DOES IT DO?

It contains special additives that treat, dissolve and clean varnishes, deposits and residues in only 5 minutes.

Does not damage gaskets or oil seals.

WHEN SHOULD IT BE USED?

FOR:

Eliminating and cleaning all type of residues and sediment from combustion
Increasing the air-tightness of cylinders
Restoring compression losses
Cleaning carbonised segments
Engines with high mileage
Engines that were not serviced when they reached the recommended mileage or time

INSTRUCTIONS FOR USE

Start the engine and wait until it reaches running temperature
Switch off the engine and remove the oil filler cap
Add the contents of the product
Replace the oil filler cap
Switch on the engine and leave it idle for a MAXIMUM OF 5 MINUTES
Switch off the engine and extract the oil through the lower crankcase.
Must be performed by a professional expert

WARNING REGARDING USE

For turbo engines that need a replacement due to breakage we recommend you carry out the cleaning process twice.

COMPATIBLE

Compatible with all engines and oils.

454 MT2000 Synthetic Metal Treatment

447 Oil Stop Leak

089 Smoke Eliminator

157 Hydraulic Valves

448 Compression Motor

RECOMMENDATIONS AND MAINTENANCE

Correct maintenance prevents expensive repairs. For this reason our

Technical Department recommends:

Clean and service the whole lubrication system:

2 years - 45,000 Km

Add the product as a preventive measure:

1 year - 30,000 Km

For extra protection, combine with

MT2000 Synthetic Metal Treatment.

Reference: 843654897577 Capacity: 300 ml. Units/Box: 15

DESCRIPTION

A product used for re-establishing the good performance of hydraulic valves in all types of engines.

WHAT DOES IT DO?

Cleans and eliminates remains of oil and carbon deposit.

It guarantees the hydraulic valves (valve tappets) are loaded correctly.

It does not change the colour, density and volume of the oil.

Does not damage gaskets or oil seals.

WHEN SHOULD IT BE USED?

FOR:

Effectively reducing the noise of hydraulic valves (valve tappets) with a cold engine
Dissolving dirt, residues and varnishes inside the lubrication channels
Engines with excessive wear or mileage
It does not affect the correct performance of catalytic converters or particulate filters.

INSTRUCTIONS FOR USE

With the engine switched off, remove the oil filler cap
Add the contents of the product
Replace the oil filler cap.

WARNING REGARDING USE

Acts progressively, which means effective results are obtained after 500 km

Apply preferably when changing the oil.

COMPATIBLE

Compatible with all engines and oils.

454 MT2000 Synthetic Metal Treatment

447 Oil Stop Leak

089 Smoke Eliminator

577 Motor Flush

448 Compression Motor

RECOMMENDATIONS AND MAINTENANCE

Correct maintenance prevents expensive repairs. For this reason our

Technical Department recommends:

Clean and service the whole lubrication system:

2 years - 45,000 Km

Add the product as a preventive measure:

1 year - 30,000 Km

For extra protection, combine with

MT2000 Synthetic Metal Treatment.

Reference: 843654897157 Capacity: 300 ml. Units/Box: 15

DESCRIPTION

State-of-the-art formula that significantly re-establishes engine compression.

WHAT DOES IT DO?

It quickly and efficiently reduces the emission of polluting gases due to oil combustion assessed by the Vehicle Inspection Test. It reduces the tolerances between the cylinder liner and piston.

It does not alter the colour, density and volume of the oil.

WHEN SHOULD IT BE USED?

Recommended uses:

As a tool to be used before the Vehicle Inspection Test: It reduces the emissions caused by oil combustion
It re-establishes the compression in engines with a high oil consumption
It prevents the saturation of catalytic converters and the particulate filter
It reduces the internal engine noises.
It does not affect the correct performance of catalytic converters or particulate filters.

INSTRUCTIONS FOR USE

With the engine switched off, remove the oil filler cap
Add the contents of the product after changing the oil
Replace the engine oil filler cap.

WARNING REGARDING USE

Apply preferably when changing the oil

COMPATIBLE

Compatible with all engines and oils.

454 MT2000 Synthetic Metal Treatment

447 Oil Stop Leak

089 Smoke Eliminator

577 Motor Flush

157 Hydraulic Valves

RECOMMENDATIONS AND MAINTENANCE

Correct maintenance prevents expensive repairs. For this reason our

Technical Department recommends:

Clean and service the whole lubrication system:

2 years - 30,000 Km

Add the product as a preventive measure:

1 year - 15,000 Km

For extra protection, combine with

MT2000 Synthetic Metal Treatment.

Reference: 843654897448 Capacity: 118 ml. Units/Box: 15

DESCRIPTION

100% synthetic, cutting-edge treatment that has been especially formulated to reduce wear and friction on all types of metals and alloys.

WHAT DOES IT DO?

It creates a thin layer over the internal engine components, reducing friction and wear, thus improving performance and lowering consumption. It drastically reduces the mechanical force and friction on all the metallic parts of the engine. It does not alter the colour, density and volume of the oil.

WHEN SHOULD IT BE USED? - FOR:

Reducing the friction and wear of the moving parts of the engine
Reducing the temperature of the engine when it is running
Silencing the internal engine noises
Protecting the engine and components from rust
Improving and prolonging the life of the oil
Essential in turbo changes/repairs
Engines that were not serviced after the recommended number of kilometres or length of time.
It does not affect the correct performance of catalytic converters or particulate filters.

INSTRUCTIONS FOR USE